
The rack is the mechanical "frame" of the HS 716 and contains all the modules required to control the power outputs. |
Особенности - Up to 12 LA 716 power modules can be inserted
- Communication via PROFIBUS DP interface
|
Дизайн - 19"-rack
- Backplane bus for CPU module, switching module and bus module
- Slots for 12 power outputs
- CPU module with PROFIBUS interface module
- Switching module
- Power supply for heater control system modules
- Decoding for switching the power outputs
- Bus module
- Containing 12 direct plug-in connectors for connecting the switching module to the power outputs
|
ФункцииCommunication - PROFIBUS DP
- The parameter settings are downloaded from the higher-level PLC
- The diagnostic information is transferred to the higher-level PLC
- Internal system bus via bus board
- Control and monitoring of up to 192 power channels
Performance features - Calculation of radiation device settings for the power output channels
- Setpoints can be adjusted in 1% steps from 0% to 100%
Diagnostics - Evaluation of the diagnostic information from the connected power outputs
- Automatic detection of the line frequency
|
Технические данные Power supply | | Input voltage | | | 230 V AC | | 187 ... 264 V | Frequency | | | 50/60 Hz | | 47 ... 63 Hz | Non-periodic overvoltage (acc. to EN 60204, Part 1) | | | 2 x VRated | | 1.5 ms (single pulse) | | 500 ns to 500 µs | Momentary voltage interruption (initial conditions: Lower limit of rated voltage = 187 V) | | | maximum 20 ms | | minimum 1 s | | Max. 10 | Power input of the control electronics | maximum 15 W | Maximum total switching power without ventilation and with ventilation (rate of flow > 2 m/s) | 124.8 kW | Mechanical data | Dimensions | | | 84 width units in 19" rack system | | 6 height units in 19" rack system | | 350 mm | Degree of protection | | | IP00 | | at least IP20 | Safety class for control cabinet | EN 61140 (VDE 0140 Teil 1) Safety Class I | |
|